Technical Cleanliness
Certificate of Technical Cleanliness of the product is a requirement of suppliers. We reduce the possibility of product damage and consequent complaints.
Metal composition analysis
The analysis of the composition of metals is performed according to the international method ISO 11885 and in accordance with your requirements or the requirements of your customers. Based on the test results obtained, you obtain professional advice in order to improve your products, wastewater and pre-prepared alloys.
Successful companies leave nothing to chance, and expect independence, accuracy and a comprehensive approach from us.
This is the only way to avoid possible complaints or inconveniences when handling various alloys.
- METAL COMPOSITION ANALYSIS
- Elementary analysis of metal
- Identification of oils and lubricants
- Heavy metal content (Ni, Cr, Zn, Pb, As, Cd, Cu, Hg)
- Contect of calcium and magnesium
Some tests may be performed by external providers. In this case, this information will be visible on the offer.
Testing metals - details under the microscope
Hardness measurement on a metal sample
Burning rate test of plastic materials
preskusanje-s-podrocja-kovinske-industrije
A document to provide your quality
After performing the calibration, testing, control and qualification procedures in the LOTRIČ Metrology Group, you will receive an approved certificate, which clearly states all the parameters that are important to your clients and enables you to prove and guarantee your quality. We are recognised as a reference partner that has been working in the field of calibrations, testing, inspection and qualifications for decades. Simultaneously with the development of services, we also developed a certificate based on the wishes, needs and in-depth cooperation of our partners.
The right information helps you with troubleshooting and upgrading your product
Analysis of fractures and defects in products
Analysis of fractures and defects in the product is an important discipline in the manufacturing industry and is used in the development of new products and in the improvement of existing products. Complex problems on the production line are not easily solved. In such cases, often the companies do not have enough resources, knowledge and analytical methods to ensure a comprehensive approach to the problem. LOTRIČ Metrology laboratories are your partner in problem solving, using chemical and mechanical methods in the field of polymer technology and metallurgical sciences.