Technical Cleanliness
Certificate of Technical Cleanliness of the product is a requirement of suppliers. We reduce the possibility of product damage and consequent complaints.
Automotive industry
In the time of automotive revolution, vehicles are undergoing faster changes than ever, forcing OEM to come up with new ways to test product quality. LOTRIČ Metrology means a full support in testing materials, components and end parts for compliance with automotive standards.
We offer you:
- All tests for automotive components in one place
- A clear and detailed certificate with a simple result: COMPLIES/DOES NOT COMPLY
- Knowledge of the requirements of leading car manufacturers: BMW, Citroën, Mercedes-Benz, General Motors, Renault, Scania, Volkswagen, Volvo.
- Test methods approved by the VolksWagen Group
- A testing laboratory for the automotive industry with more than 20 years of experience.
We perform the tests according to following standard and numerous other procedures, which are tailored to your requirements.
PLASTIC COMPONENTS
- Mechanical propertiesChemical propertiesBurning behaviourEmissionSurfaces
- Tensile strengthIR identificationSelf-extinguishing propertiesOdour testColour and gloss determination
- Impact strength (Izod, Charpy, Dynstat)DSCGlow wire testVOC numberAbrasion resistance
- Modulus of elasticityTGA #Burning rateFOG numberScratch resistance
- Hardness (Shore A and D)MVR - MFRFormaldehydeChemical resistances (water, oil, brake fluid, graphite, organic solvents, acids, cleaning agents, oil derivate)
- Vicat softening pointViscosityThermodesorbtionUV aging
- Ball indentation testDensity1,3 butadiene content
- Ball drop testWater absorptionFogging
- Compression testAnnealing residueExposure to ozone according to ISO 1431-1
- Shrinkage
- Flexural strength
- Toughness (Izod, Charpy, Dynstat)
METALLIC COMPONENTS
- Material specificationGalvanic and other inorganic coatingsOrganic coatings
- Standard metal identificationDegree of corrosionDegree of corrosion
- Elemental analysisMetallographic determination of degree of blisteringDegree of delamination
- Mechanical propertiesSurface protectionCross cut test
- Tensile strengthInorganic coating thicknessDegree of cracking
- Bending testColour and gloss determination
- Casting porosityCoating thickness
- Metallurgical requirementsCoating hardness
- Dimensional measurementsCoating hardness
- Resistance to impact
- Resistance to scratches
List of automotive standards
- BMW
- GS 90010Types of surface protection for metallic materials
- GS 90011Coating of parts made of metallic materials by means of organic materials
- GS 95011-4Dewing test
- GS 95024-3-1Electrical and electronic components in motor vehicles – Environmental requirements and testing
- GS 96007Gas-shielded Arc Welding (SG) of Steel
- GS 97038Determination of burning behavior to automotive interior trim materials
- GS 90010-1Types of surface protection for metallic materials
- AA-0180Cross hatch testing
- BOSCH
- 1 279 926 749Washing process for bondable and/or adhesive aluminum components
- 1 279 921 180Prüfvorschrift für Restschmutz
- FIAT
- 7G2000Determining the resistance to combustion of the non -metallic materials for parts inside vehicle passenger compartment
- 9. 57405Zinc plating for ferrous metal parts (cast-iron, carbon, or alloy steels)
- FORD
- WSS-M15P4-FAssembly performance, hard mold-in-color interior components
- BO 131-03Interior Odor Test
- GM (GENERAL MOTORS)
- GME 00201Organic Coat Finish for Chassis Components
- GMI 60206Determination of Resistance to Corrosion of Automotive Components by Salt Spray Fog Testing
- GMW3172General Specification for Electrical/Electronic Components – Environmental/Durability
- MERCEDES BENZ (DAIMLER CHRYSLER)
- DC-10611 Rev. AE/E Component Environmental Testing Specifications
- DC-10612E/E Component Test Selection Process
- 49 CFR 571.302Flammmability of Interior Materials
- DBL 5307Supply Specification Flame retardant properties
- DBL 5410_2010-08SupplySpecification Thermoplastic parts for control elements, bearing elements, fasteners, and spacers
- DBL 6992Dewatering Fluids with and without Anticorrosion Additives
- DBL 7381_2008-10Supply Specification Coating for major passenger ca rcomponents / body panels and other functional parts* with high corrosive stress
- DBL 5410Test methods and general requirements
- DBL 5555Supply Specification Finished parts and semi-finished products made of organic polymer materials
- DBL 7381Coating for major passenger car components/body panels and other functional parts with high corrosive stress
- MBN 10494-5Paint test methods - Part 5: Technical-mechanical tests
- DBL 5404Parts manufactured from thermoplastics for the direct and indirect areas of the passenger compartment, for passenger compartment heating and ventilation, paneling and housings
- DBL 7391Coating / Painting for Parts with High Corrosive Stress
- DBL 8451Electrodeposited zinc or zinc alloy coatings for components manufactured from ferrous materials
- MBN 10494-1Lacktechnische Prüfmethoden – Teil 1: Allgemeine Anforderungen
- MBN 10494-5Lacktechnische Prüfmethoden – Teil 5: Technisch-mechanische Prüfungen
- MBN 10494-6Lacktechnische Prüfmethoden – Teil 6 : Klimatische Prüfungen
- NISSAN (NES)
- 87000NDS00Nissan Seat Design Specification
- NES M0141Methods of Test for Coating of Synthetic Resin
- NES D0031Marking of polimeric parts
- NES M0094Test Method of Flammability of Interior Materials for Automobiles
- NES M0131Methods of High Temperature Test for Passenger Compartment Synthetic Resin Parts
- NES M0132Methods of Thermal Cycle Testing for Plastic Parts
- Stopnja korozijeISO 10289*
- NES M0133Testing Methods of Chemical Resistance for Plastic Parts
- NES M0134Falling Ball Impact Test Methods for Synthetic Resin Parts
- NES M0135Weatherability and Light Resistance Test Methods for Synthetic Resin Parts
- NES M0159Testing Methods of the Scratch Resistance of Interior Polypropylene Resin Parts
- NES M0160Method of testing the smell of interior parts
- NES M0301Substance Use Restrictions
- NES M0402VOC test method of cabin parts
- NES M0403VOC for cabin parts
- JIS S 6006Pencil, coloured pencils and leads for them
- JAGUAR
- ISO 1817Rubber, vulcanized or thermoplastic -- Determination of the effect of liquids
- JAGUAR JMS 20.15.08Screenwash / Powerwash Solution
- JAGUAR JMS 20.04.03Brake Fluid - Super Dot 4
- JAGUAR JMS 20.24.01Composition of Standard Test Fuels
- JAGUAR JNS 30.14.24Resistance to Fluids Dip/Dry Method
- OPEL
- QK 000 595Engineering Material Specification - Elastomer modified polypropylene
- QK 002 600Engineering Material Specification - PA 6
- QK 003 200Engineering Material Specification - PMMA
- QK 001 113Engineering Test Specifications - Fusion Weldet Joints
- QK 001 131Engineering Test Specifications - Fusion Weldet Joints
- PSA - PEUGEOT - CITROEN
- B51 1110Metallurgical Requirements
- A32 4140Tolerances non specifiees pieces plastiques
- 815 2220Thermochemical Treatments - Case Hardening- Carbonitriding
- B15 4101Electrolytic Zinc Coatings and Associated Finishes Tie Process
- B15 4140Coatings Electrolytic Chromium Plating on Plastic Parts
- B15 5220Barvna površinska zaščita - nanos na kovinske mehanske dele
- B54 1120Aluminij in njegove zlitine - livarske zlitine - zlitina za odlitke
- B62 0020Plastic Parts Specific Material Requirements
- B62 0030Thermoplastic, Thermosetting Materials, Thermoplastic Elastomers And Rubbers- Specifications
- B62 0200Plastic Parts Specific Material Requirements
- B62 0300Thermoplastic, Thermosetting Materials, Thermoplastic Elastomers And Rubbers- Classification
- D35 1205Case Hardened or Carbonitrided Parts - Hardness Gradient
- D35 1872Case Hardened or Carbonitrided Parts - Thickness or Treated Layers
- D42 1235Rubber and Plastiv Parts - Behaviour to Impact (Falling Weight Method)
- D45 1234Parts Contaning Plastic Elements- Reaction to heat in a non-radiant dry oven
- D45 5232Vehicle Equipment Thermal Resistance (artificial sunlight without ultraviolet)
- D47 1279Plastic Components behaviour when in contact with protection and protection removal products
- D47 1309Materials and Parts for Motor Equipment Ageing according to given Climatic Cycle
- D47 1309 (2007)Materials and Parts for Motor Equipment Ageing following a given Climatic Cycle
- RENAULT
- 3703012Validation of the Resistance of the Polymer Materials to Ageing in Light and to stress of Weather
- 00 10050Prohibited and Restricted Substances List and Declaration Modes
- 00 10415Manufacture and Supply of Products General Requirements
- 3407005Cleanliness of the Oil System FOR ALL Types of the Vehicles
- D42 1775Inside And Outside Plastic Parts Resistance To Scratching By Abrasion
- D45 1010Polymer Materials And Parts Inside And Outside Passenger Compartment - Colourfastness To Rubbing
- D45 1837Paint Coatings On Plastic Parts And Mass - Staining Of Colored Materials By Automotive Fluids
- D47 1165Accelerated Ageing- Product applied for Bonding, Sealing, Anti-gritting, Damping, Anti-Corrosion and Protection Functions
- D47 1279Plastic and Rubber Parts Resistance to Bodywork Conditioning and Deconditioning Products
- D49 3091Resistance to Whitening by Hot Soapy Water of Parts in Styrene Materials for the Exterior
- 00 10050
- 00 10060Conception with the aim of Recycling
- 00 10420Material Reference Sheet Definition and Elaboration
- 03 10100Compact Vulcanized Rubbers - Classification- Symbols - Properties
- 1600003Plastic Parts - General Requirements
- 3100805Plastic Parts - Insert Rotation Resistance
- 3200008Interior Trim Parts General Requirements.
- 3612009Window Washing Fluid Lines
- 4701002Decorative Electrolytic Coatings on Plastic Parts
- 1234Pars with Plastic Elements Heat Behaviour in a non-radiating Dry Owen
- 1528Vulcanized Rubber and Flexible Plastic Low Temperature Rigidity Gehman Method
- D17 1058Neutral Salt Spray Test
- D41 1099Tensile Strength Vulcanized Rubbers And Thermoplastic Rubbers
- D41 1507Rubbers Tearing Strength (Delft Specimens)
- D42 1235Plastic Or Rubber Parts Impact Behaviour (mass Drop Method)
- D45 1132Compact Rubbers - Compression Set At Constant Deformation
- D45 1333Horizontal Flammability (materials Inside Passenger Compartment)
- D47 1020Coatings And Parts In The Passenger Compartment - Colour Fastness To Water, Sea Water And Perspiration
- D47 1053Vulcanised Rubbers And Elastomersthermoplastics Accelerated Ageing In Air
- D47 1098Rubbers - Thermoplastic Rubbers - Thermoplastics And Thermosettings Ageing In The Liquids And The Greases
- D47 1100Rubber Parts - Ageing In Ozonized Air
- D47 1407Rubbers And Plastics - Effect Of Protective Coating Products in the Engine Compartment
- D47 1748Plastics- Ageing In Fluids
- D47 1924Plastics And Rubbers - Occassional Contact With Automobile Fluids
- SCANIA
- STD4319Accelerated corrosion test - Atmospheric corrosion
- STD4165Corrosion protection surface coatings – Flake coatings and electrolytic zinc coatings
- STD4111Surface treatment - Directives and instructions
- STD4111Surface treatment - Directives and instructions
- STD4158Chemical substances which must not be used – Scania Black list
- STD4159Chemical substances with limited use - Scania Grey list
- TOYOTA
- TSM5500GThermoplastic Polyurethane Materials
- VOLKSWAGEN
- PV 2005Vehicle Parts Testing of Resistance to Environmental Cycle Test
- PV 1210Climate Corrosion Test Cycle (Salt Spray Test Standard)
- PV 3015Non-Metallic Materials for Interior Trim Determining Condensable Constituents (G)
- PV 3341Non-Metallic Materials for Interior Trim - Emission of Organic Compounds
- PV 3347Cleanliness of Engine Components Determining Residual Particle Quantities
- PV 3900Components in Passenger Compartment Odor Test
- PV 3925Polymer Materials Measuring Emissions of Formaldehyde
- PV 1015Kontaktkorrosion Elastomere durch und Kunststoffe in Verbindung mit Leichtmetallen, Prufung des spezifischen Durchgangswiderstandes
- PV 1200Vehicle Parts Testing of Resistance to Environmental Cycle Test (+80/-40) °C
- PV 1303Non-Metallic Materials Exposure Test of Passenger Compartment Components
- PV 1400Schmierfette Festschmierstoffgehalt. Siebtest
- PV 3341Determination of emisssion of organic compounds
- PV 3345VW AG Konzernnorm: Automatikgetriebe und periphere Baugruppen: Prüfung auf Restschmutz
- PV 6097Porosity Determination According to VW 50097
- VW 50014General Requirements for Components and Semi-Finished Products Requirements and Tests
- VW 50097Porosity of Metal Castings Requirements
- VW 80000Electric and Electronic Components in Motor Vehicles up to 3,5 t, General Requirements, Test Conditions and Tests
- VW 01134Cleanliness Requirements for Engine Components
- VW 13750Surface Protection of Metal Parts Surface Protection Types, Codes
- VW 44045Polypropylene, Finished Parts Material Requirements
- VW 50097Porosity of Metal Castings Requirements
- VW 50123Thermoplastic Elastomers Quality Requirements
- VW 50180Components in Passenger Compartment Emission Behaviour
- VW 50185Resistance to Open-Air Weathering
- VW 50190Metrological Evaluation of Color and Gloss Level Visual Evaluation of Chrome Surfaces
- VW 91100Environmental Standard for Vehicles, Policy, Specifications
- VW 91101Vehicle Parts, Materials, Operating Fluids Avoidance of Hazardous Substances
- VW 96043 + PN 780Interieur Emissionsverhalten
- VW 96390 + PPV 4050Bestimmung flüchtiger, organischer Emissionen aus nicht Kraftstoff beaufschlagten Bauteilen, Emissionsmessung in SHED-Kammern
- VW 50181Fogging ; Determination Of The Foggincharacteristics
- VW 50133PA66 für Fertigteile außerhalb des Fahrzeuginnenraumes Werkstoffanforderungen
- TL 212Anodized Coatingson Aluminum Parts Requirements for Surface Protection
- TL 217Zinc Coatings Surface Protection Requirements
- TL 233Non-Electrolytically Applied Zinc Flake Coatings with Top Coat Surface Protection Requirements
- TL 244Zinc/Nickel Alloy Coatings Surface Protection Requirements
- TL 245Non-Electrolytically Applied Zinc Flake Coatings Surface Protection Requirements
- TL 778Tieftemperaturfett Schmierstoffanforderungen
- TL 1010Burning Behaviour/Flammability
- TL 52035PP/EPDM/PE PolymerBlend, Finished Parts Material Requirements
- TL 1011Testing the flammability of plastics
- TL 52476POM Werkstoffanforderungen
- TL 82184Pedal zavore Zahteve za funkcijo
- TL 82186Pedalni sklop Zahteve za funkcijo
- TL 52636POM, Fertigteile (nicht für Fahrzeuginnenraum), Werkstoffanforderungen
- TL 909Headlamp Functional Requirements
- TL 52437Polycarbonate (PC) Headlamp Covering Panes with Functional Coating Material Requirements
- TL 260Paint Coating of Metal Surfaces Requirements for Surface Protection
- TL 52440PA6, Glass-Fiber Reinforced, Finished Parts Material Requirements
- VOLVO
- STD 1021,1Conditioning of painted test panels before testing
- STD 1021,5211Test Method, Test Panels Paints and enamels
- STD 1024,7132Test Method, Chip resistance
- STD 1026,5172Determination of colour in colour-matching booth
- STD 1026,5272Testing method, Gloss, Paints and enamels
- STD 1026,8177Test Method, Chemical resistance, Paints and enamels
- STD 1027,051Evaluating degrees blistering of paints
- STD 1027,1372Test Method, Accelerated outdoor exposure, Scab corrosion test
- STD 1027,1375Test Method Corrosion resistance, Accelerated atmospheric corrosion testing - Volvo Indoor Corrosion Test (VICT)
- STD 1027,3375Moisture resistance in tropical cabinet
- STD 1029,5471Test Method Adhesion, water spraying under high-pressure
- STD 1029,5472Test Method, cross-cut test; Paint and enamel
- STD 1029,5473Test Method Adhesion, Paints and enamel
- STD 5711,102Corrosion test in artificial atmospheres-salt spray tests; Inorganic coatings
- STD 5715,102Evaluation of degradation of paint coatings, Designation of degree of rusting
- STD 5750,12List of colours
- STD 5751,5Painting Y 500, Metal substrates
- STD 423-0014Accelerated Corrosion test, Atmospheric corrosion
- STD 121-0004Cathodically protective surface treatment without friction requirement Y 2000, With or without top coat
- STD 420-0002Evaluation of degradation of paint coatings, Designatiomn of degree of rusting
- IVECO STANDARD
- 15–0470Determination of resistance to water of paints and enamels
- 15–0488Determination of abrasion resistance of protective coatings by mateallic grit-blasting
- 15–0503Determination of preservative product humidity resistance under condensation conditions
- 15-6035Scab Corrosion Test
- 16-0180Accelerated Ageing ny atmospheric agents - Method for vehicle external components
- GARRETT; ALLIED SIGNAL; HONEYWELL
- IDM 4215Material Specification, DIE CAST ALUMINIUM ALLOY UNS A 13801 (AA 380 MODIFIED)
- IDM 5371Specifikacija, Odlitki iz sive litine UNS F12101
- IDM 5381Material Specification, HIGH SILICON PLUS MOLYBDENUM DUCTILE IRON CASTINGS
- IDM 5415Industrial division material specification, SIMO CHROMIUM DUCTILE CAST IRON
- ZF Friedrichshafen AG
- 1000000 154595Cleanliness of torque converter components
- Brose Technik für Automobile
- 590295-104Chrom-VI-freie Überzüge - Technische Spezifikationen
- 590607-103Prevention of emissions from the vehicle interior
- DEUTSCHE NORM
- DIN 40 050 Teil 9IP-Schutzarten; Schutz gegen Fremdkörper, Wasser und Berühren Elektrische Ausrüstung
- DIN 53 516Testing of rubber and elastomer, Determination of abrasion resistance
- DIN EN IS0 2409Beschichtungsstoffe - Gitterschnittprufung
- EN ISO 12944-1Corrosion protection of steel structures by protective paint systems, General introduction
- ECSS Requirements & Standards Division
- ECSS-Q-ST-70-26CSpace product assurance, Crimping of high-reliability electrical connections
- HELLA Norm
- HN38011Cellular Rubber - Technical Delivery Conditions -
- INTERNATIONAL STANDARD
- ISO 60068-2-58Environmental testing - Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices
- ISO 16750-4Road vehicles — Environmental conditions and testing for electrical and electronic equipment, Part 4: Climatic loads
- ISO 20567-1Paints and varnishes — Determination of stone-chip resistance of coatings — Part 1: Multi-impact testing
- ISO 945Cast iron - Designation of microstructure of graphite
- ISO 16232-4Road vehicles - Cleanliness of components of fluid circuits - Part 4: Method of extraction of contaminants by ultrasonic techniques
- ISO 16232-7Road vehicles - Cleanliness of components of fluid circuits - Part 7: Particle sizing and counting by microscopic analysis
- ISO 16232-10Road vehicles - Cleanliness of components of fluid circuits - Part 10: Expression of results
- ISO 16750-1Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 1: General
- ISO 16750-3Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 3: Mechanical loads
- ISO 16750-4Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 4: Climatic loads
- ISO 16750-5Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 5: Chemical loads
- JEDEC STANDARD
- JESD22-B102DSolderability
- Japanese Industrial Standard
- JIS D 0203Method of moisture, rain and spray test for automobile parts
- JIS D 5500Automobile parts - Lighting and light signalling devices
- SOUTH AFRICAN NATIONAL STANDARD
- SANS 4541:1978Metallic and other non-organic coatings — Corrodkote corrosion test (CORR test
- MIL-STD-81 OF
- METHOD 505.4SOLAR RADIATION (SUNSHINE)
- METHOD 506.4RAIN
- METHOD 507.4HUMIDITY
- METHOD 509.4SALT FOG
- METHOD 510.4SAND AND DUST
- METHOD 521.2IClNGlFREEZlNG RAIN
- MATERIAL SPECIFICATON (KIA, HYUNDAI)
- MS210-05MOLDED PLASTIC PARTS - INTERIOR
- MS211-46POLYAMIDE 66 (NON-REINFORCED)
- MS 213-52FILLED PP – FOR SCRATCH & IMPACT RESISTANT
- MS 213-58UNFIELD POLYPROPYLENE FOR DOOR TRIM
- MS225-18ABS – HEAT RESISTANCE
- MS300-34odor evaluation methods of interior materials for automobile.
- MS300-54STANDARD TEST METHOD – FOGGING
- MS 300-55TEST METHOD OF VOLATILE ORGANIC COMPOUNDS FROM VEHICLE INTERIOR PARTS
- MS210-05MOLDED PLASTIC PARTS – INTERIOR USE
- MS 300-08FLAMMABILITY RESISTANCE – INTERIOR MATERIALS
- PIRELLI
- P 84RAW MATERIALS TEST METHOD, DETERMINATION OF TOTAL TRANSMITTANCE IN POLYTHENE SHEET
- P 135RAW MATERIALS TEST METHOD, DETERMINATION OF MELTING POINT OF POLYTHENE BY MEANS OF DSC
- SEA
- J575Tests for Motor Vehicle Lighting Devices and Components
- J1756Determination of the Fogging Characteristics of Interior Automotive Materials
- SUZUKI (SES)
- SES N 3133Salt Spray Test Methods for Surface Treatment on Metal-Based Materials
- JAGUAR LAND ROVER
- STJLR.51.5262Performance Requirements Of Non- Decorated Plastics
- STJLR.99.9999Restricted Substance Management Standard
- GKN
- TL-99060000005Technical Delivery Requirements, Powder coating/UV Painting
- VDA
- VDA 237-299Surface protection for the brake calipers made of cast iron
- VDA 270Determination Of The Odour Characteristics Of Trim Materials In Motor Vehicles
- VDA 621-415Testing of Corrosion Protection of Vehicle Paint by Alternating Cycles Test
- VDG
- P202Volume Deficits of Castings Made from Aluminium, Magnesium, and Zinc Casting Alloys
- P201Volume Deficits of Non-Ferrous Metal Castings
- ZFL
- 7036 050 129Porenklassifikation bei Druckstücken und Stellschrauben aus Aluminium- und Zinkdruckguss
- 864-5 VTECHNISCHE LIEFERBEDINGUNGEN FUER ZWJSCHENLAGEN UNTER SCHIENEN
- EN 12345Welding - Multilingual terms for welded joints with illustrations
- SIST ISO 3795:1999Cestna vozila, traktorji ter kmetijski in gozdarski stroji - Ugotavljanje obnašanja notranjih oblog v požaru
- SIST ISO 12040:1997Grafična tehnologija - Odtisi in tiskarske barve - Ugotavljanje obstojnosti s filtrirano svetlobo ksenonske žarnice
- SIST-TS 16949Sistemi vodenja kakovosti
- 0445 CZ4030Prüfvorschrift Sauberkeitsprüfung für CP4 – O-Ringe
- LAND ROVER
- LRLTM.30.MS.302Flammability of interior materials
Some tests may be performed by external providers. In this case, this information will be visible on the offer.
Gallery
Mechanical tests on polymeric materials
Microscopic examination of metal samples
A gray scale for evaluating color changes on the material
Burning rate test of plastic materials
Expert opinion
They solve our problems for us
We work together with the LOTRIČ Metrology group in environmental testing and technical cleanliness of products designed for leading car manufacturers such as Audi, BMW and Citroën. Because we want to optimize our production processes to ensure our products are of the best possible quality, we implement changes in our production processes where necessary, based on the reliable analysis provided by LOTRIČ Metrology laboratory. We work with them because they understand our needs and our customer’s requirements, so we do not need to waste time for additional explanations and coordination. We receive the certificates in a flash and are always informed in real time of the testing procedure; the results are always supported with a clear explanation.
Simona Petrič, CEO at ELVEZ Ltd.
We can focus on our work
We established a reliable partnership with the LOTRIČ Metrology group in order to help us meet the demanding requirements of automotive standards which our innovative solutions in electronics and lighting systems must comply with. In the laboratory in Kranj, they perform tests and issue the certificates we need for our polymer and metal products. We see the biggest advantage in their flexibility – our company just forwards the requests of our customers, which are already well known to the experts at LOTRIČ Metrology. They carry out the service tailored to our needs without unnecessary complications. Reliable results and responsive personnel who are always open to any eventual adjustments are proof of their excellence.
Aleš Kobe, LAB manager at Hella Saturnus Slovenija Ltd.
A document to provide your quality
After performing the calibration, testing, control and qualification procedures in the LOTRIČ Metrology Group, you will receive an approved certificate, which clearly states all the parameters that are important to your clients and enables you to prove and guarantee your quality. We are recognised as a reference partner that has been working in the field of calibrations, testing, inspection and qualifications for decades. Simultaneously with the development of services, we also developed a certificate based on the wishes, needs and in-depth cooperation of our partners.
Automotive product testing
Vehicles are changing faster than ever, so OEMs and their suppliers are forced to use ever new quality testing procedures. In the LOTRIČ Metrology Group, we are your support in determining compliance with customer requirements when it comes to materials and components.
The right information helps you with troubleshooting and upgrading your product
Analysis of fractures and defects in products
Analysis of fractures and defects in the product is an important discipline in the manufacturing industry and is used in the development of new products and in the improvement of existing products. Complex problems on the production line are not easily solved. In such cases, often the companies do not have enough resources, knowledge and analytical methods to ensure a comprehensive approach to the problem. LOTRIČ Metrology laboratories are your partner in problem solving, using chemical and mechanical methods in the field of polymer technology and metallurgical sciences.
Testing the properties of materials
Changes in the properties of ABS materials
With the method of artificial aging, we detect changes in the properties of ABS materials.
By testing materials, even in the product manufacturing phase, many problems can be avoided in advance. LOTRIČ Metrology helps you in various fields – mechanics, metallography, polymer technology and chemistry.