Emission testing
For safe components with controlled emissions.
Artificial aging
Determine the long-term impact of exposure to weather conditions on your product in standard laboratory conditions. When developing new products, LOTRIČ Metrology certificate provides proof of quality and longevity of your product.
Check the impact of aging on products by:
- Exposure to a representative level of the influence factor for an extended time period
- Exposing the product to a higher level of influence factor than expected in order to accelerate the aging process
- Exposing the product to an increasing impact of influence factor in order to determine the point of failure
We perform the tests according to the standard procedures and numerous other procedures listed bellow. The procedures are tailored to your requirements.
Environmental exposures
- TEMPERATURE AND HUMIDITY
- Constant condenzationISO 6270-2
- Tropical testIEC 60068-2-30
- Change of temperature (Test N)EN 60068-2-14
- ColdEN 60068-2-1
- Dry heatEN 60068-2-2
- UV LIGHT TESTING
- Simulated solar radiation at ground levelIEC 60068-2-5
- Methods of exposure to Xenon-arc lampISO 16474-2
ISO 4892-2
- INDUSTRIAL CLIMATE
- SO2DIN 50018
- ozone
Evaluation after the exposure
- PLASTIC MATERIALS / POLYMERS
- Assessment of change in colorEN 20105 - A02
- Tensile strengthISO 527-1
- Flexural strengthISO 178
- Impact properties (Charpy)ISO 179
- Impact properties (Izod)ISO 180
- Impact properties (Dynstat)DIN 53435
Some tests may be performed by external providers. In this case, this information will be visible on the offer.
Salt spray test according to ISO 9227
Salt chamber testing
Samples after salt spray test
UV testing
Standard test specimens 1A for tensile testing
A document to provide your quality
After performing the calibration, testing, control and qualification procedures in the LOTRIČ Metrology Group, you will receive an approved certificate, which clearly states all the parameters that are important to your clients and enables you to prove and guarantee your quality.
We are recognised as a reference partner that has been working in the field of calibrations, testing, inspection and qualifications for decades. Simultaneously with the development of services, we also developed a certificate based on the wishes, needs and in-depth cooperation of our partners.
The right information helps you with troubleshooting and upgrading your product
Analysis of fractures and defects in products
Analysis of fractures and defects in the product is an important discipline in the manufacturing industry and is used in the development of new products and in the improvement of existing products. Complex problems on the production line are not easily solved. In such cases, often the companies do not have enough resources, knowledge and analytical methods to ensure a comprehensive approach to the problem. LOTRIČ Metrology laboratories are your partner in problem solving, using chemical and mechanical methods in the field of polymer technology and metallurgical sciences.
Testing the properties of materials
Changes in the properties of ABS materials
With the method of artificial aging, we detect changes in the properties of ABS materials.
By testing materials, even in the product manufacturing phase, many problems can be avoided in advance. LOTRIČ Metrology helps you in various fields – mechanics, metallography, polymer technology and chemistry.